To Next PageTo Next Page
Need help?Do you have a question about the Boss KATANA-50 Mk II and is the answer not in the manual?
General| Power Output | 50 W |
|---|---|
| Amp Types | 5 (Acoustic, Clean, Crunch, Lead, Brown) |
| USB | Yes |
| Type | Solid State |
| Reverb | Yes |
| Aux Input | 1 x 1/8" |
| Headphone Output | 1 x 1/4" |
| Speaker | 1 x 12-inch |
| Controls | Gain, Volume, Bass, Middle, Treble, Master, Power Control |
| Dimensions | 470 x 238 x 398 mm (18-9/16 x 9-3/8 x 15-11/16 inches) |
| Weight | 11.6 kg (25 lbs 10 oz) |
| Footswitch | Optional (GA-FC |
| EQ | 3-band (Bass, Middle, Treble) |
| Inputs | 1 x 1/4" (instrument), 1 x 1/8" (aux) |
| Outputs | 1 x 1/4" Headphone Output, 1 x 1/4" Line Output |
| USB Connectivity | Yes (for audio and editing via BOSS Tone Studio) |
| Footswitch I/O | 1 x 1/4" Footswitch Input |
| Channels | Panel |
Defines WARNING and CAUTION notices and explains common safety symbols used in the manual.
Provides essential guidelines for safe electrical connection, placement, environmental conditions, and general operation.
Details advice on power supply, placement, maintenance procedures, and data backup for repairs.
Covers critical cautions for handling power cords, connecting/disconnecting cables, and general safety advice.
Illustrates and describes the top panel controls for various KATANA Mk II models.
Explains the functions of the AMP TYPE, GAIN, VOLUME, and EQUALIZER (BASS, MIDDLE, TREBLE) controls.
Details the EFFECTS section, PRESENCE, MASTER volume, and POWER CONTROL switch.
Describes how to store and recall sounds using TONE SETTING, BANK, and CHANNEL buttons.
Explains the TONE SHAPE and CAB RESONANCE switches for tonal modification.
Covers the main POWER switch and the SOLO function for lead boosts.
Details the AC IN, SPEAKER OUT, and EFFECT LOOP SEND/RETURN jacks.
Explains the STEREO EXPAND switch and connections for external effect devices.
Describes LINE OUT, POWER AMP IN, and MIDI IN jacks for external PA, preamps, and MIDI control.
Details USB port for computer connection, AUX IN for audio sources, and FOOT CONTROL jacks.
Explains the PHONES/REC OUT jack for headphone monitoring or recording.
Covers the EXPAND switch for stereo or dual amp configurations.
Details how to connect footswitches (FS-6, FS-7, FS-5L) and the GA-FC controller.
Explains how to connect and use expression pedals for volume or effect control.
Describes using footswitches for bank/channel switching and GA-FC for tone/effect control.
Provides instructions on how to perform a factory reset on the unit's settings.
Lists the available effects (BOOSTER, MOD, FX, DELAY, REVERB) and their default assignments.
Explains how to select and adjust the depth of each effect type using the panel knobs.
Introduces the amp's dedicated software for downloading effects and editing settings.
Illustrates the signal path and connectivity for the KATANA-50 Mk II amplifier.
Shows the signal path and connectivity for KATANA-100, 100/212, HEAD, and Artist Mk II amplifiers.
Provides a detailed comparison of controls, inputs, and outputs across all KATANA Mk II models.
Lists indicators and details the various input/output connectors for each model.
Specifies power consumption, physical dimensions, weight, and included/optional accessories.
