To Next PageTo Next PageWhy won't my Boss MRGB65 RGB Unit turn on?
If the RGB Unit on your Boss Speakers isn't turning on, the possible causes include a blown fuse or the switch not being engaged. You should check and replace the fuse, and ensure the switch is in the 'on' position.
What to do if my Boss Speakers have no sound?
If you are not hearing any sound from your Boss Speakers, there are a few things you can check: * A speaker might be blown, in which case you should replace the faulty speaker. * The volume may be set too low or muted. Try increasing the volume. * The device playing the audio may be paused or muted. Ensure the device's volume and playback status are correct.
What to do if my Boss Speakers unit has become unresponsive?
If your Boss Speakers unit becomes unresponsive, it might be due to a power glitch or interference. Disconnect the power for 10 seconds to reset the unit.
Guidelines for safe operation and handling of the product.
Warnings and advice for safe and proper installation.
Crucial steps and warnings before starting the installation process.
Contact information and resources for assistance.
Identification and function of buttons on the RF remote controller.
Detailed technical data for the speaker and RGB hub.
General
