Need help?Do you have a question about the Boss OS-2 and is the answer not in the manual?
General| Effect Type | Overdrive/Distortion |
|---|---|
| Input Impedance | 1 M ohm |
| Input | 1/4 inch phone type |
| Output | 1/4 inch phone type |
| Controls | Drive, Tone, Level, Color |
| Power Supply | 9 V battery or AC adaptor |
| Dimensions | 73 x 129 x 59 mm |
| Weight | 400 g |
| Output Impedance | 1 kΩ |
Connects to the AC adaptor (PSA-series) for continuous power without battery.
Lights up when effect is on; also serves as battery check indicator.
Adjusts the output sound level when effects are applied, balancing with bypass sound.
Adjusts the tonal character of the effected sound, affecting upper/lower frequency emphasis.
Connects the unit's output signal to an amplifier or other effects devices.
Engages or disengages the effect. The Check Indicator lights up when the effect is on.
Allows the pedal to be opened for battery replacement.
Adjusts the balance between overdrive and distortion sound components.
Controls the amount of overdrive/distortion applied to the sound.
Accepts input from guitar/instruments; powers unit when plug is inserted.
Adjusts the balance between overdrive and distortion sounds.
Controls the degree of overdrive/distortion applied.
Sets the output volume, balancing effect on/off levels.
Adjusts the tonal character of the effected sound.
Depress the pedal switch to turn the effect on or off.
To Next Page
