Need help?Do you have a question about the Boss OD-3 and is the answer not in the manual?
General| Effect Type | Overdrive |
|---|---|
| Controls | Level, Tone, Drive |
| Bypass | Buffered Bypass |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Weight | 430 g |
| Technology | Analog |
| Manufacturer | Boss |
| Power Supply | 9V DC |
| Dimensions | 73 x 129 x 59 mm |
| Connectors | Input, Output |
| Inputs | 1 |
| Outputs | 1 |
Provides guidance on power source selection and usage, including battery installation and AC adapter heat.
Offers advice on optimal unit placement to prevent interference and environmental issues like heat or moisture.
Details the AC adaptor jack for connecting the unit to a power source, specifying compatible series.
Explains the function of the CHECK indicator light, which also serves as a battery status indicator.
Describes the output jack used to connect the unit to an amplifier or other audio devices.
Details the pedal switch used for turning the effects ON or OFF, and its interaction with the CHECK indicator.
Explains the thumbscrew used to open the pedal, facilitating battery replacement and access.
Describes the input jack for connecting instruments and notes its function as the unit's power switch.
Explains the meaning and usage of WARNING and CAUTION notices to alert users to risks.
Defines various symbols used to convey safety information, including prohibitions and mandatory actions.
To Next Page
