9
MAKING THE CONNECTIONS
AC Adaptor
(
PSA-Series; Optional
)
Electric Guitar
Amplifier
OUT DC 9V / 200 mA
* Inserting a plug into the Input Jack will automati-
cally switch the unit on.
* Before connecting or disconnecting any patch
cords, be sure all the volume controls in your
system are set to minimum. This will help pre-
vent any damage to system components.
* To prevent malfunction and/or damage to speak-
ers or other devices, always turn down the
volume, and turn off the power on all devices
before making any connections.
* Always make sure to have the volume level
turned down before switching on power. Even
with the volume all the way down, you may still
hear some sound when the power is switched on,
but this is normal, and does not indicate a
malfunction.
* When operating on battery power only, the
unit's indicator will become dim when battery
power gets too low. Replace the battery as soon
as possible.
To Next Page
Loading...
