6
Basic Operation
Selecting a Phrase Memory
Use the [ ] / [ ] buttons to select a
phrase memory (1–99).
Display Explanation
Only number
displayed
Empty phrase
Press pedal to start recording
Dot in lower right
Phrase containing data
Press pedal to start loop playback
Number and
“
oS” displayed
alternately
One-shot phrase
Press pedal to play phrase only once
(not loop)
To perform recording, overdubbing, and playback, press the pedal as shown in the diagram.
Refer to”Saving a Phrase for One-Shot Playback” (p. 10).
Recording
Record your guitar or bass performance, or
the sound from an audio player connected
to the AUX IN jack.
• Auto recording (p. 11) lets you start recording the
moment you begin performing.
• You can also record along with rhythm sounds (p. 12).
• When shipped from the factory, phrases 90–99 contain
demo phrases.
“Recording” versus “Overdubbing”
In this manual, we refer to the act of recording to an empty
phrase for the rst time as “recording.” Any subsequent
recordings that are made, which are added on top of the
existing recording, we refer to as “overdubbing.”
To Next Page
Loading...
Need help?
General
