Need help?Do you have a question about the Boss RE-2 and is the answer not in the manual?
General| Bypass | Buffered Bypass |
|---|---|
| Current Draw | 65 mA |
| Controls | Mode |
| Input | 1/4-inch phone type |
| Output | 1/4-inch phone type |
| Power Supply | 9V DC |
| Dimensions | 73 mm (W) x 129 mm (D) x 59 mm (H) |
| Weight | 450 g |
| Accessories | Alkaline battery (9 V, 6LR61) |
Details DC IN, OUTPUT, and INPUT jacks for audio and power connections.
Explains the CTL/EXP jack for external pedal and expression pedal connections.
Covers the Pedal Switch, MODE knob, and CARRYOVER switch functions.
Adjusts ECHO, REVERB, INTENSITY, TONE, REPEAT RATE, and WOW & FLUTTER effects.
Illustrates connecting FS-5U, FS-6, and FS-7 footswitches to the pedal.
Explains how to configure footswitch modes and polarity for external control.
Configures whether the direct sound is outputted along with the effect.
Selects between Analog Bypass or RE-201 Simulation for direct sound.
Changes the tape speed range and tap delay time range for the REPEAT RATE knob.
Configures sounds for MIN and MAX positions of an expression pedal.
Configures long-press functions for the pedal switch (TAP/TWIST).
Step-by-step guide for holding down the pedal and replacing the battery.
Recommendations for using alkaline batteries and handling them safely.
To Next Page
