To Next Page
D
Debra FryeJul 26, 2025
What to do if memory is full on Boss Music Equipment?
- LLeslie MillsJul 27, 2025
If the memory of your Boss Music Equipment is full, delete any phrases that you no longer need to free up space.
What to do if memory is full on Boss Music Equipment?
If the memory of your Boss Music Equipment is full, delete any phrases that you no longer need to free up space.
What to do if internal memory must be formatted on Boss RC-30 Music Equipment?
If the internal memory of your Boss RC-30 Music Equipment must be formatted, proceed to format it.
What to do if the battery has run low on Boss RC-30 Music Equipment?
If the battery of your Boss Music Equipment has run low, replace it with a new one.
What to do if further overdubbing is not possible on Boss RC-30?
If further overdubbing is not possible on your Boss Music Equipment, try re-saving the phrase.
Why recording does not end immediately when I press the right pedal on Boss Music Equipment?
If rhythm is on, or if you recorded a phrase that is shorter than the minimum recording time (approximately 1.5 seconds), the length of the phrase is adjusted automatically; this may mean that recording does not end immediately when you press the right pedal.
Why I cannot change the playback tempo on Boss RC-30 Music Equipment?
You cannot change the playback tempo in the following situations: * If the phrase has not been saved. * While phrases are being switched (PLAY indicator blinking rapidly). * When you attempt to set the tempo for a phrase that is looped over an interval shorter than the minimum recording time (approximately 1.5 seconds).
What to do if this WAV file is unplayable on Boss Music Equipment?
Check the format of the WAV file to ensure it is compatible.
Warns against turning off power during specific operations to prevent data loss.
Instructions for recording new audio and layering performances.
Saving, deleting phrases, and undo/redo functions.
Details USB connection and compatible file formats.
Procedures for backing up, recovering, and loading phrase data.
Provides meanings and actions for error messages displayed by the unit.
Warns against turning off power during specific operations to prevent data loss.
Instructions for recording new audio and layering performances.
Saving, deleting phrases, and undo/redo functions.
Details USB connection and compatible file formats.
Procedures for backing up, recovering, and loading phrase data.
Provides meanings and actions for error messages displayed by the unit.
General| Type | Loop Station |
|---|---|
| Loop Tracks | 2 |
| Inputs | 2 x 1/4" Instrument, 1 x 1/8" Aux In |
| Outputs | 2 x 1/4" (L/Mono, R) |
| Effects | Beat Loop, Tempo Delay, Lo-Fi, Filter, Sweep, Phaser, Modulation, Vocoder, Robot |
| USB | Yes (for data transfer) |
| Power Supply | AC adapter (PSA series) |
| Number of Tracks | 2 |
| Dimensions | 13.5" x 7.9" x 2.4" |
| Weight | 3.75 lbs |
| Sampling Frequency | 44.1 kHz |
| Recording Time | 3 hours |
| Maximum Recording Time | 3 hours |
| Power Source | 6 x AA batteries |
| Phrase Loop Time | 3 hours |
| Total Recording Time | Approx. 3 hours |
