Boss SY-1000 User Manual (English)

Other manuals for Boss SY-1000

Questions and Answers:

P
pmccormickJul 27, 2025
How to fix no sound or low volume on my Boss Synthesizer SY-1000?
- K
  Kenneth ClarkJul 27, 2025
  If you're not getting any sound or the volume is too low on your Boss Synthesizer SY-1000, here are some things to check: * Make sure the [OUTPUT LEVEL] knob isn't turned down all the way; adjust it as needed. * Ensure the GK pickup volume isn't too low; raise it to an appropriate level. * Verify the GK pickup select switch is set to “MIX,” not “GUITAR.” * Increase the PATCH LEVEL if it's too low. * Check all connections to the SY-1000 and other devices. * Confirm that the connected amp or mixer is powered on and the volume is at an audible level. * Try replacing the connecting cable to rule out any shorts. * If using USB, ensure the [SYSTEM] - USB AUDIO settings are correct and adjusted appropriately.
A
Alicia HernandezJul 31, 2025
Why is the volume uneven among the strings on my Boss Synthesizer SY-1000?
- C
  Carolyn WarrenJul 31, 2025
  If the volume is inconsistent across the strings on your Boss Synthesizer SY-1000, it might be due to the GK pickup sensitivity. Make sure the GK pickup sensitivity setting was adjusted correctly for each string. Also, refer to the manual of your GK pickup, and attach the GK pickup correctly.
C
cynthiaguerreroAug 4, 2025
What to do if the knobs don’t work on my Boss Synthesizer?
- J
  jgrayAug 4, 2025
  If the knobs on your Boss Synthesizer aren't working, it could be because the system parameter KNOB LOCK is turned “ON”. To resolve this, turn the system parameter KNOB LOCK “OFF.”
G
George SmithAug 9, 2025
Why can’t I enter Tuner mode on my Boss SY-1000 Synthesizer?
- T
  Todd Phillips DVMAug 9, 2025
  If you can't enter Tuner mode on your Boss Synthesizer, the system parameter BANKDOWN&UP SW (TUNER) might be set to “OFF”. To fix this, turn the system parameter BANKDOWN&UP SW (TUNER) “ON.”
C
Cynthia ComptonAug 13, 2025
Why is my Boss Synthesizer SY-1000 oscillating?
- D
  David SparksAug 13, 2025
  If you're experiencing unwanted oscillation with your Boss Synthesizer, it might be due to excessively high gain or feedback settings. Try decreasing gain values or volume-related parameters in the effect settings. Also, reduce any high feedback values in effects settings like DELAY.
L
Lori HartmanAug 17, 2025
What to do if patches not switching on Boss Synthesizer SY-1000?
- A
  amberthomasAug 17, 2025
  If patches aren't switching on your Boss Synthesizer SY-1000, it's likely because you're not on the Play screen. Patch switching is only available from the Play screen. Press the [EXIT] button to return to the Play screen.
A
Ashlee HoltAug 21, 2025
Why is the expression pedal result different for each patch on my Boss Synthesizer SY-1000?
- M
  Molly FranklinAug 21, 2025
  The effect produced by the expression pedal on your Boss Synthesizer SY-1000 varies from patch to patch because each sound (patch) has different settings. Check the effect of each patch beforehand to understand how the expression pedal will affect it.

Boss SY-1000 Specifications

General

MIDI	In, Out, Thru
Power Supply	AC Adaptor
Type	Guitar Synthesizer
Sampling Frequency	48 kHz
Polyphony	Varies depending on sound engine and settings
Number of Effects	Over 150
Display	LCD
USB	USB Type-B (audio interface, MIDI, editor/librarian)
Weight	3.6 kg / 7 lbs 15 oz
Presets	200 User + 200 Preset
Effects	Over 150 types
Looper	Yes (38 seconds mono, 19 seconds stereo)
Connectivity	USB, MIDI
AD/DA Conversion	24 bits
Control Inputs	CTL 1, 2 / EXP 1, CTL 3, 4 / EXP 2
Outputs	2 x 1/4" main outputs, 2 x 1/4" sub outputs, 1/4" headphones output
Expression Pedal Input	Yes (1 x 1/4")