Need help?Do you have a question about the Boss SY-200 and is the answer not in the manual?
General| Bit rate | 24 bit |
|---|---|
| Product type | Digital synthesizer |
| Product color | Blue |
| Volume control | Rotary |
| User presets quantity | 128 |
| Keyboard number of keys | 7 |
| MIDI in | Yes |
| USB ports quantity | 1 |
| Display type | LCD |
| Battery type | AA |
| Power source type | AC, Battery |
| Number of batteries supported | 3 |
| AC adapter included | No |
Weight and Dimensions| Depth | 138 mm |
|---|---|
| Width | 101 mm |
| Height | 63 mm |
| Weight | 630 g |
Details the display and primary knobs on the synthesizer's top panel.
Explains the functions of the MENU and EXIT buttons.
Identifies and describes the input/output jacks on the rear panel.
Details the MIDI jacks and USB port located on the side panel.
Step-by-step guide for saving edited settings to a memory location.
Instructions on how to recall previously saved memory settings.
Procedure to swap memory order and reset memories to factory defaults.
Explains how to enter and navigate the unit's main menu.
Guide for connecting and assigning functions to external footswitches.
Details settings for ON/OFF and CTL switches.
Configures switch modes, pitch, and tempo parameters for effects.
Configures expression pedal functions and SEND/RETURN jack behavior.
Adjusts system-wide settings and MIDI communication parameters.
Manages MIDI CC messages, tempo sync, and program change mapping.
Instructions on how to restore the unit to its factory default settings.
Steps for safely installing or replacing batteries.
Instructions for attaching the included rubber feet to the unit.
Lists key technical specifications such as power, dimensions, and weight.
Safety warnings regarding small parts, ground terminal, and general handling.
Advice on data backup before repairs and Roland's liability for lost data.
Information regarding third-party software licenses and trademarks.
To Next Page
