Need help?Do you have a question about the Boss TU-12H and is the answer not in the manual?
Displays tuning status and pitch information.
Lights up to show note name and tuning status.
Built-in microphone for detecting sound.
Connects to guitars, basses, and other instruments.
Connects to amplifier or other audio equipment.
Selects tuning range and powers the device on/off.
Used to select the reference pitch.
Used to decrease pitch selection.
Used to increase pitch selection.
Port for connecting the AC power adapter.
Guides the user for accurate tuning.
Shows how to connect the tuner to an amplifier.
Illustrates connections for guitars, basses, and keyboards.
Sets the low (L) or high (H) tuning range.
Sets the reference pitch for tuning.
Instructions on how to produce a sound for tuning.
Explains how indicators show the produced tone.
Instruction to begin the tuning process.
How to change the reference pitch using buttons.
Meter and indicators display note name and pitch simultaneously.
Demonstrates tuning with A=440Hz reference pitch.
Demonstrates tuning with A=443Hz reference pitch.
Instructions for tuning outside standard A440/A443.
Step-by-step guide for battery replacement.
Notes on using the AC adaptor and potential noise issues.
Maximum power draw of the device.
The frequency range the tuner can detect.
The precision of the tuning measurement.
Specifies the type of oscillator used.
The default reference pitch setting.
Lists the types of input/output jacks available.
Physical size of the tuner in mm and inches.
The weight of the tuner.
Lists items included with the tuner.
To Next Page
General
