Boston Scientific SpyGlass DS User Manual (English)

Other manuals for Boston Scientific SpyGlass DS

Questions and Answers:

L
Lisa JonesAug 7, 2025
What to do if the Boston Scientific SpyGlass DS does not start?
- D
  Dean ShermanAug 7, 2025
  If the Boston Scientific Controller doesn't start, check the following: * Ensure the power cord is firmly connected at both ends. * Verify the receptacle has power by testing it with another electrical device. * Check the receptacle’s circuit breaker to ensure it is not tripped. * Reboot the controller. Power it down, then restart it. If the problem persists, contact Boston Scientific support. * Replace the power cord if it's defective. * If the controller fuse is blown or the controller is damaged, contact Boston Scientific for support.
A
Angela BuckleyAug 15, 2025
What to do if catheter connection cable is plugged into the Boston Scientific SpyGlass DS Controller, but no video image is displayed?
- M
  Megan LawrenceAug 15, 2025
  If you've connected the catheter cable to the Boston Scientific Controller but see no video image, try these steps: * Power up the video monitor and ensure it's properly connected to both the monitor and the controller. * Verify the monitor is set to the correct video input. * Ensure the catheter cable is firmly inserted into the connector with the locking tab facing up, and that the connection terminals are dry and clean. * Replace the SpyScope™ DS Catheter if it is broken or defective. * Press the illumination light button to turn on the light. The light On/Off button should be illuminated blue.
M
Marcia GarciaAug 27, 2025
What to do if catheter connection cable is plugged into the Boston Scientific Controller, but cable connection screen is still displayed?
- M
  michael06Aug 27, 2025
  If the catheter connection cable is plugged into the Boston Scientific Controller, but the cable connection screen remains, ensure the catheter cable is firmly inserted into the connector with the locking tab facing up and that the connection terminals are dry and clean. If the issue persists, the SpyScope DS Catheter may be broken or defective and require replacement.

Boston Scientific SpyGlass DS Specifications

General

Brand	Boston Scientific
Model	SpyGlass DS
Category	Controller
Language	English

Summary

INTRODUCTION

Where to Get Help

Contact information for technical support, ordering, service, and return authorization.

DEVICE DESCRIPTION

User Information

Details about the intended users and necessary knowledge for operating the device.

Lists the components included in the SpyGlass DS Digital Controller package.

Model Numbers

Identifies the specific model numbers for the SpyGlass DS Digital Controller.

Specifications

Provides detailed electrical and physical specifications of the controller.

INTENDED USE/INDICATIONS FOR USE

CONTRAINDICATIONS

Lists conditions or patient types for which the device should not be used.

WARNINGS

Critical safety instructions and potential hazards to avoid during use.

PRECAUTIONS

Measures to prevent damage to the equipment or minor injury to the patient or user.

ADVERSE EVENTS

Potential negative outcomes or side effects that may occur during or after use.

CONFORMANCE TO STANDARDS

Information regarding the device's compliance with relevant industry standards.

HOW SUPPLIED

Details about the product as it is delivered to the customer, including packaging.

Handling and Storage

Guidelines for proper handling and storage to maintain device integrity and performance.

SPYGLASSTM DS DIGITAL CONTROLLER COMPATIBILITY

SETUP AND OPERATION

Front Panel Features

Identifies and explains the functions of controls and indicators on the front of the controller.

Rear Panel Features

Identifies and explains the functions of connectors and switches on the rear of the controller.

Patient Environment

Guidance on the safe and appropriate placement of the controller relative to the patient.

Note about Performance

Important considerations for positioning the controller to ensure optimal performance.

Isolating the Controller from the Main Power Supply

Procedures for safely disconnecting the controller from its power source.

Software

Information on how to check the software revision level on the controller.

Setup of the Controller

Step-by-step instructions for preparing the controller for initial use.

Starting the Controller

Detailed instructions on how to power on and initiate the controller.

Configure the Monitor for the Video Mode

Steps to set up the connected video monitor for optimal image display.

Adjusting the Brightness of the Video Image and Operating Light ON/OFF button

How to control image brightness and the operating light of the controller.

Recovering from a Controller Failure

Procedures to follow in case of controller shutdown or lock-up during operation.

COMPLETING A PROCEDURE

Considerations When Using a Laser or EHL Device

Notes on expected video behavior when using specific energy devices with the system.

Using the Controller In an Endoscopy Procedure

Steps for integrating the controller into a standard endoscopy procedure.

Shutting Down the Controller

Instructions for safely powering off the controller after use.

Routine Inspection and Maintenance

Guidance on periodic checks and upkeep of the controller.

Cleaning and Disinfection

Procedures for cleaning and disinfecting the controller to ensure hygiene.

Disposal of the Product, Accessories, and Packing Materials

Guidelines for environmentally responsible disposal of the device and its components.

TROUBLESHOOTING AND RESPONDING TO ERROR CODES

Troubleshooting Chart

A guide to diagnose and resolve common operating problems and error conditions.

WARRANTY

Limited Warranty

Terms and conditions of the product's warranty coverage.

Obtaining Warranty Service from Boston Scientific Corporation

Instructions on how to contact support and initiate warranty claims or repairs.

APPENDICES

Appendix 1-Guidance and Manufacturer's Declaration-Electromagnetic Emissions

Information on the device's electromagnetic emissions and compliance.

Appendix 2-Guidance and Manufacturer's Declaration-Electromagnetic Immunity

Details on the device's immunity to electromagnetic disturbances.

Appendix 3-Guidance and Manufacturer's Declaration-Electromagnetic Immunity

Further information on electromagnetic immunity standards and guidelines.

Appendix 4-Recommended Separation Distance Between Portable and Mobile RF Communications Equipment and the SpyGlass DS Digital Controller

Guidance on maintaining safe distances from RF devices to prevent interference.

Appendix 5-Medical Design Criteria and Specifications

Specifications related to the medical design and safety criteria of the controller.

Related product manuals

Boston Scientific M00546650

28 pages

Boston Scientific SpyGlass DS User Manual

Table of Contents