Page 46
Vercise⢠DBS Remote Control 3 Handbook, 92104391-01
Telemetry Help
The Telemetry Help tool is also available
to assist you in improving communication
between the Remote Control and the
Stimulator. To use the Telemetry Help tool,
select Telemetry Help
. The following
screen will be displayed:
The telemetry bars indicate the strength of
wireless communication. The number of
bars will change depending on the distance
and orientation of the Remote Control
from the Stimulator. This tool will continue
to measure the strength of communication
for 30 seconds or until is pressed.