TROUBLESHOOT
Page 47
Vercise™ DBS Remote Control 3 Handbook, 92104391-01
Unlinked Remote Control
The Remote Control and Stimulator must establish a one-to-one link in order to
communicate. This prevents a Remote Control from accidentally communicating with
another Stimulator. If your Remote Control is not linked to your Stimulator (i.e., when
you have a brand new Remote Control), the following screen will appear and will
prompt you to link the Remote Control to the Stimulator:
Please contact your physician if you see this message. Your
physician can access special functions through the Clinician Menu
to link your Remote Control to your Stimulator.
To Next Page
Loading...
