5-11
Section 5 • Care & Maintenance
190 Montauk
Antifreeze and other winterizing uids can be toxic
to aquatic life and cause harmful eects to plant life.
Improper disposal of, or spillage of antifreeze and/
or any winterization uids can cause environmental
problems when allowed to empty into waterways or
on the ground. Furthermore, it is illegal, punishable
at minimum by nes.
Environment
Reinforcement Locations
Your boat has been manufactured with reinforcement
in various locations throughout the deck.
In the event you wish to add equipment to your
boat which requires you to penetrate the deck with
fasteners, the chart below provides a description of
the material and recommended fasteners to secure
your equipment. The diagram on the following
page illustrates the size, location and type of the
reinforcement available.
Repeatedly immersing the trailer in water during boat
launching can cause a variety of problems. Water
seeping into the wheel hubs will cause the grease to
emulsify and can prematurely corrode the bearings.
Check with the trailer manufacturer for scheduled
maintenance of your trailer.
Trailer Storage
Used antifreeze or any winterization uids, should
not be disposed of into sanitary sewers or publicly
owned treatment plants.
Persons who have any questions regarding recycling
antifreeze or other toxic uids should write or call
their state’s EPA oce.
* In all cases it is recommended to drill and countersink a pilot hole to prevent damage to the gelcoat surface.
**Also known as Whaleboard
Reinforcement Construction Equipment weight Fastener Type*
Plywood Standard boat building material Light Self-tapping screws
Trevira Thick spunbound polyester fabric Light Sheet Metal screws
Sparalloy High density plastic Medium Self-tapping screws
Phenolic** Fiberglass reinforced composite board Heavy Drill & Tap
To Next Page
Loading...
Need help?
General
