9
What should I do if the solar panel I received
is damaged, missing parts, or has no output?
Please send relevant pictures to our after-sales mailbox
service@bougerv.com immediately, and leave your order number.
We will reply one by one according to the chronological order sent by
the customers.
Q3
A3
What kind of device can be charged by this
solar panel？
Q4
How do I need to install this solar panel?
Q5
1. Solar Power Station
2. Lead-acid Battery（need the solar charge controller）
3. Lithium Battery（need the solar charge controller）
BougeRV sells different kinds of MPPT/PWM controllers, lithium iron
phosphate battery and power stations to build your solar system.
A4
Tear off the protection tape behind the solar panel, and then stick the
solar panel to the ground.
A5
How should I roll my rollable solar panel?
Q6
Always roll the Rollable Solar Panel solar side out. Rolling solar side in
will damage the panel and affect performance.
A6
Why the solar panel can't provide 100% of the
output energy？
Q2
1. Limited by light intensity. Please refer to Q1 for more details.
2. Limited by the solar charge controller. The output conversion
efficiency of the PWM controller is 75%, and the output conversion
efficiency of the MPPT controller is above 90%.
3. Limited by the power station. The PV input voltage and PV input
current of the power station will limit the output of the solar panel.
It'd be better to confirm the input parameters of the power station
before building a solar panel system.
A2
To Next Page
Loading...