BOULT Y1 Gaming - Page 2

Bluetooth Lost:
Turn off mobile phone's Bluetooth, earbuds will enter pairing
mode and can pair with other devices. If the connection range
is exceeded, the earbuds will enter back into connection mode.
If there’s no connection within 5 minutes, the earbuds will turn off.
Reset
2.
1.
3.
Delete all “Boult Audio Airbass” Bluetooth records on the
phone and turn off Bluetooth.
Put earbuds in the charging case and then take out to
pairing modes, tap L&R 5 times simultaneously, hear “DU”
prompt voice to clear all pairing.
Put earbuds back into the charging case.
Maintenance Instructions
Open the charging case, and take out the earbuds, the earbuds LEDs
will start flashing automatically until paired with a device.
Activate Bluetooth on the device, turn on Bluetooth, search for pairing
name “Boult Audio Airbass” and click on it.
Single Earbud Usage (Mono Mode): Please note that both the
earbuds can be used in Mono Mode.
Play/Pause
Tap the MFB once
Next Track
Double Tap the right MFB
Previous Track
Double Tap the left MFB
Volume +
Triple Tap the right MFB
Volume -
Triple Tap the left MFB
Voice Assistant
Long Press the MFB for 2s
Answer the Call
Tap the MFB once
End Call/Reject
Double Tap the MFB
Game/Music Mode
Tap the MFB four times
To disconnect from either of the devices, go to the Bluetooth
settings of the respective device and press disconnect/forget.
Connect the Y1 Gaming with your first device. Once your Y1
Gaming is paired with the first device, turn off the Bluetooth of
your first device.
Now turn on the Bluetooth of your second device and follow the
same steps to connect to your Y1 Gaming Bluetooth earbuds.
Once Y1 Gaming is connected to your new device, turn on
Bluetooth of the first device.
You will hear a sound again “connected” which means both your
devices are now connected to the Y1 Gaming earbuds.
You can now enjoy music and take calls from both of your
connected devices on your Y1 Gaming earbuds.
.
.
.
.
.
Dual Device Connectivity:
You will hear ‘power on’ when the headset powers on.
You will hear ‘power off’ when the headset powers off.
You will hear ‘connected’ when the headset is paired.
You will hear ‘low battery’ when the headset is in low power status
You will hear ‘gaming mode’ when the headset is in gaming mode.
.
.
.
.
.
If your earbuds fail to pair, or only one works, reset them.
Voice Prompts
Warranty is valid/invalid only basis of the below criteria:
The product should be purchased through legal and formal
channels to be applicable for warranty.
Damaging the product intentionally/unintentionally,
or due to natural disasters, etc. is not covered in the warranty. 
.
.
.
When both the earbuds are connected, put one earbud back into
the charging case; the other earbud can be used normally.