F350/F650 Roll Laminator Manual
- 2 -
Forward
Thank you for your choosing our product. In order to correct use this product , kindly read this manual
carefully. Take care every operate detail. Therefore it will help your operate skills and make the perfect
production and improve the operate speed.
This machine is developed by rich experience, abundant economy and technology of corporation. There is
serious quality control process which from design to material purchase and produce. Fully reflecting the
corporation motto: “perfection pursuing, Customer satisfaction”
Safety caution：
Be care to use this machine, don’t put the hand or another body to running part of the machine , which
avoid any accident. Kindly see more using, maintenance caution as below.
1．Put the machine on the solid and air circulate place .
2．According the mechanical rear instruction to connect the power, If the voltage is too lower or higher ,the
machine will run abnormally.
3．Ensure your safe, please use the earthed power socket.
4．Don’t put several electric in one socket，because if overload will caused to fire or electric shock.
5．Before clean the machine, please take off the power .
6．Heating roller temp. is over 130 , So don’t touch the heating roller when using or power off in a short ℃
time.
7．Don’t put irrelevant things into the laminator .
8．Don’t touch the heating roll and film surface, or the film will be adhered to the roller and difficult to
clean.
9．Don’t repair the laminator by yourself. If problem, kindly connect the agent.
Following”warning”labels, you can find it from the machine:
To Next Page
Loading...