Boway F350 - Laminating Technology and Skills; Daily Maintenance

F350/F650 Roll Laminator Manual
- 15 -
7、Laminating Technology and skills
To do the perfect laminating image，there are some important characters : temperature ,tension regulate
and detection time of glued film on heating rolls. So，see the printed matte detail, choose the suitable film,
temperature ,speed and tension。In general, More thickness film or printed matte, we need more slow speed
and more higher temperature ，because we need more melt time for the thickness film；otherwise，thin film or
printed matte, will be more faster speed and low temperature.
Under the glued film can be melted ,we can setting the temperature more lower , so that the film glue is
melting as the best situation (the glue is melting from white color to transparent, means it start to have the
toughness) . According the paper thickness to setting the temperature 80—120℃
Under no wrinkle and stick very well, we can set the tension more smaller. If the temperature is too higher
or tension is more bigger, maybe the laminated paper will be curl.
If the film stop on rolls for some times, best take away that film before use，Because the down film will
be expansion seriously, After cool and shrink, the paper will be easily curl on one side.
It’s not suitable for more thin paper to laminating. Because If the paper is very thin , it will be curl caused
by cooled film. If glue or something else stick on rolls, It will be affect laminating effect. Please clean it in
time.
Suggestion：Overlapping the back of standby paper, do the double sides laminating, after this, we can
cutting it and get the single laminating ,So that we can improve the work efficiency.
8、Daily Maintenance
The stability and service life of machine are related to daily maintenance, Regularly to clean the laminator.
Apply oil on activity parts , the machine service life will be more longer.
Clean heating roll, set the temperature about 80℃, then use soft cloth to clean the left glued liquid.
In order to keep clean the machine, we can clean the sundries, dust in regularly
If you have the Mechanical repair of common sense, You can regularly to check the screw is solid or not.
If happen any un-clear question, please contact the local agent or our company.
Warning：Not allowed from agent or our company, please don’t disassemble the laminator, or you will
loose the warranty.