BÖWE M26 - Page 77

67
M21-M26-M30
11. Maintenance 11.
Disposing of the machine
 Drain cartridge filter.
 Allow cartridge to drip dry and dispose of it.
 Drain Economy filter
 Remove, clean and dry filter discs
 Empty water separator, operating material tank, extraction tank and operating material cooler
(dispose of process water, decant solvent).
 Empty out process water tank, dispose of process water.
 Empty tanks. You can draw off the solvent residue by tilting the machine and attaching one end of a
flexible suction tube to an external pump and inserting the other end through the sight-glass opening.
 Empty condenser.
 Empty out solvent pump and vacuum pump, do not leave any solvent residue in the base of the
pump
 Empty and clean the still when it is cold, dispose of residues.
 Pump cooling agent out of the refrigeration unit
(done by authorized customer service technician).
 Close open solvent lines tightly when disassembling the machine.
 You must completely remove all residues that could present a hazard to people and the environment,
Observe safety regulations concerning the handling of solvent (see Point 2).