BÖWE P12 - Special Maintenance Features

83
P12 /P15 /P18
1 Pressure gauge
2 Reducing valve
3 Drain valve
4 Water separator
5 Intake air at least 6
bar (87 psi)
6 Pressure control
switch
11. Maintenance 11.
11.4. Special Maintenance Features
11.4
Compressed air armature
When needed, drain the water separator at the drain valve and aerate the pneumatic control
system over this valve during maintenance work. Check the water separator filter insert for dirt.
Clean or replace as needed. Never work without an original filter insert!
707760-14-0
Strainer
Open the strainers in the water and steam system and clean the strainer inserts (monthly).
Lubricating points
Use a grease gun to lubricate the cage bearing and sealing rings at the
appropriate grease nipples (monthly).
Use only lithium-based lubricating greases, such as.
- ALVANIA 3 (SHELL)
- MARSON L2 (FINA)
- BEACON 2 (ESSO)
- LGMT 3 (SKF)
Limit switches at maintenance openings
The safety limit switches prevent the machine from starting operation as long as a lockable machine
opening is open.
This means: Cage loading door, still door, button trap cover