Need help?Do you have a question about the Bowers & Wilkins 606 S3 and is the answer not in the manual?
General| Frequency Response | 52Hz - 28kHz ±3dB |
|---|---|
| Sensitivity | 88dB spl (2.83Vrms, 1m) |
| Impedance | 8Ω (minimum 3.7Ω) |
| Recommended Amplifier Power | 30W - 120W into 8Ω on unclipped programme |
| Type | 2-way |
| Drive Units | 1x ø25mm |
| Harmonic Distortion | <1% 100Hz - 22kHz |
| Finish | Black, White |
Instructions for floor mounting the 603 S3 speaker.
Warnings about handling sharp spikes and safe installation.
Details conventional and bi-wired speaker cable connection methods.
Safety advice regarding electrical connections and plug types.
Details on tweeter, midrange, bass cones, and system type.
Specifications for speaker drivers and audible frequency response.
Measures speaker output and sound purity at different frequencies.
To Next Page