Need help?Do you have a question about the Bowers & Wilkins 684 and is the answer not in the manual?
General| Sensitivity | 90dB spl (2.83V, 1m) |
|---|---|
| Nominal Impedance | 8Ω (minimum 3.0Ω) |
| Crossover Frequency | 4kHz |
| Recommended Amplifier Power | 25W – 150W into 8Ω on unclipped programme |
| Drive Units | 1x 25mm aluminium dome high-frequency, 1x 165mm woven Kevlar cone bass/midrange |
| Finish | Black |
| Type | 2-way vented-box system |
| Frequency Range | -6dB at 45Hz and 50kHz |
Details compliance with WEEE and RoHS environmental directives.
Lists all items included in the speaker packaging.
Guides on attaching plinth and spike feet for floor mounting.
Provides advice for optimal speaker placement for sound quality.
Offers placement guidelines for conventional stereo setups.
Gives positioning advice for home theatre front channels.
Warns about keeping magnetic items away from speakers.
Explains how to connect speaker cables to the amplifier.
Explains the initial break-in period for speakers to reach optimal performance.
Provides guidance on cleaning and maintaining the speaker cabinets.
Outlines the warranty terms, coverage, and exclusions.
Declares compliance for model 684 with EMC and Safety Directives.
Confirms manufacturing quality control meets compliance needs.
Declares compliance for model 683 with EMC and Safety Directives.
Confirms product documentation meets compliance needs.
To Next Page