Need help?Do you have a question about the Bowers & Wilkins 685 and is the answer not in the manual?
General| Type | 2-way vented-box system |
|---|---|
| Sensitivity | 88dB spl (2.83V, 1m) |
| Nominal Impedance | 8Ω (minimum 3.7Ω) |
| Recommended Amplifier Power | 25W - 100W into 8Ω on unclipped programme |
| Crossover Frequency | 4kHz |
| Drive Units | 1x ø25mm aluminium dome high-frequency, 1x ø165mm woven Kevlar cone bass/midrange |
| Dimensions | 340mm x 198mm x 331mm (H x W x D) |
| Harmonic Distortion | <1% 100Hz - 22kHz (90dB, 1m) |
| Finishes | Black Ash, Light Oak, Red Cherry |
| Frequency Range | -6dB at 42Hz and 50kHz |
Guidance on mounting speakers using floor-stands, shelves, or wall brackets.
Advice on optimal placement for stereo and home theatre systems.
Recommended speaker placement for standard stereo configurations.
Guidance on positioning speakers for home theatre surround sound.
Instructions for connecting speakers to an amplifier using conventional or bi-wire methods.
Tips for adjusting speaker position and room acoustics to optimize sound.
Guidance on cleaning and maintaining speaker cabinets and grilles.
Details of the product warranty period, coverage, and claims process.
To Next Page