Need help?Do you have a question about the Bowers & Wilkins 705 and is the answer not in the manual?
General| Nominal Impedance | 8Ω (minimum 3.7Ω) |
|---|---|
| Recommended Amplifier Power | 30W - 120W into 8Ω on unclipped programme |
| Type | 2-way vented-box |
| Sensitivity | 88dB spl (2.83V, 1m) |
| Drive Units | 1x ø25mm (1 in) Decoupled Double Dome tweeter, 1x ø165mm (6.5 in) Continuum cone bass/midrange |
| Harmonic Distortion | Less than 1% 100Hz - 22kHz |
| Finish | Rosenut, Satin White |
Details the conditions and limitations of the warranty coverage.
Outlines the procedure for seeking warranty service and necessary documentation.
Welcomes the user and emphasizes reading the manual for optimal performance.
Explains compliance with RoHS and WEEE directives for product disposal.
Provides instructions on how to safely unpack the product and check contents.
Offers guidance on optimal speaker placement for sound quality and listening experience.
Warns about magnetic fields and advises on keeping sensitive items away from speakers.
Details how to properly connect the speakers to an amplifier, including bi-wiring.
Highlights specific safety precautions regarding 4mm banana plugs in certain regions.
Guides users on adjusting speaker placement and room acoustics for better sound.
Explains the initial period where speaker performance stabilizes and components settle.
Provides instructions on cleaning and maintaining the speaker cabinets and drive units.
Lists the core technical specifications and features of the 705 model.
Provides a brief overview of the 705's system type and design.
Details the specific types and sizes of the high-frequency and bass/midrange drivers.
Specifies the operational frequency limits (-6dB points) of the speaker.
States the speaker's frequency response within a given tolerance on the reference axis.
Describes the sound dispersion angles horizontally and vertically.
Indicates the speaker's sound pressure level output for a given input power.
Lists the levels of harmonic distortion at specified frequencies and output levels.
Specifies the speaker's electrical impedance, including the minimum value.
Indicates the frequency at which the signal is split between drive units.
Defines the continuous and peak power handling capabilities of the speaker.
Suggests the maximum acceptable impedance for speaker cables.
Provides the physical height, width, and depth of the speaker.
States the overall weight of the speaker.
To Next Page
