Need help?Do you have a question about the Bowers & Wilkins 702 S3 and is the answer not in the manual?
General| Type | Floorstanding speaker |
|---|---|
| Midrange | 1x 150mm (6 in) Continuum cone FST midrange |
| Sensitivity | 90dB spl (2.83Vrms, 1m) |
| Impedance | 8Ω (minimum 3.1Ω) |
| Net Weight | 29.5 kg (65 lbs) |
| Tweeter | 1x 25mm (1 in) Decoupled Carbon Dome |
| Frequency Range | 28Hz to 33kHz |
| Frequency Response | 46Hz - 28kHz ±3dB |
| Recommended Amplifier Power | 30W - 300W |
| Dimensions | 200mm (7.9 in) width |
| Finish | Gloss Black, Satin White |
| Bass | 3x Ø165mm (6.5 in) Aerofoil Profile bass |
Illustrates packed component parts and notes on missing items.
Details product compliance with international directives like RoHS and WEEE.
Instructions for floor mounting with plinth and critical safety warnings for feet.
Safety advice for using spike feet, including adjustments and floor protection.
Guidance for shelf placement, stereo, home theatre, and magnetic field considerations.
Instructions for conventional and bi-wired speaker connections, including terminal types.
European safety regulations concerning banana plugs and mains sockets.
Using speaker placement and foam plugs to control bass response and room resonance.
Adjusting speaker angles and room furnishings for improved focus and tonal balance.
Guidance on the initial listening period for speakers to achieve optimal performance.
Instructions for cleaning cabinets, veneers, and tweeter housings.
To Next Page