Need help?Do you have a question about the Bowers & Wilkins DM602 S3 and is the answer not in the manual?
General| Sensitivity | 90dB spl (2.83V, 1m) |
|---|---|
| Crossover Frequency | 4kHz |
| Type | 2-way vented box |
| Nominal Impedance | 8Ω (minimum 4.0Ω) |
| Power Handling | 120W |
| Recommended amplifier power | 30W - 120W into 8Ω |
| Bass Driver | 1 x 165mm (6.5in) woven Kevlar cone |
| Tweeter | 1 x 25mm (1 in) alloy dome |
| Dispersion Horizontal | 40° |
| Finishes | Black Ash |
Details the conditions and limitations of the product warranty, including exclusions.
Procedure for obtaining warranty service and required proof of purchase.
Welcome and guidance to read the manual for optimal speaker performance and setup.
Step-by-step instructions for safely removing speakers from packaging.
Guidelines for ideal speaker placement to achieve optimal sound quality and stereo imaging.
Information on magnetic field interference and recommended safe distances for electronic devices.
Instructions for connecting speakers to amplifiers, covering single and bi-wiring configurations.
Critical safety advice regarding speaker terminal usage and potential electrical hazards.
Tips for adjusting speaker placement and room acoustics to enhance sound reproduction.
To Next Page