To Next PageTo Next Page
Need help?Do you have a question about the Bowers Sylvac XT3 and is the answer not in the manual?
General| Brand | Bowers |
|---|---|
| Model | Sylvac XT3 |
| Category | Measuring Instruments |
| Language | English |
Identifies the measuring head and its parts.
Explains the operation of the ratchett controller for pressure.
Details how to place the gauge and set pressure for calibration.
Instructions for securely attaching interchangeable measuring heads.
Shows the current measurement reading and its sign.
Explains indicators for Preset, Set, and Reference modes.
Covers battery, unit, data send, and hold status indicators.
Describes how to use buttons to navigate the SET menu.
Details button usage for the REFERENCE menu.
Explains button operations within the PRESET menu.
Outlines button functions for the BLUETOOTH menu.
Shows button operations for the AUTO SWITCH OFF menu.
Describes button functions for the HOLD menu.
Steps for activating the instrument and entering calibration mode.
Procedure for switching the instrument off to standby or off.
Instructions on how to reset all device parameters to default.
How to access and use the SET mode for measurement adjustments.
Guide to setting and selecting different reference values (REF1-REF4).
How to enter and set desired preset measurement values.
Instructions for changing the unit of measurement between millimeters and inches.
How to set the displayed measurement resolution (e.g., 0.01 or 0.001).
Explains manual power off and automatic shutoff after inactivity.
How to turn the HOLD function on or off to freeze readings.
Steps to freeze the current measured value on the display.
How to turn the Bluetooth module on or off.
Steps to erase previous Bluetooth pairing information.
How to view the device's MAC address for identification.
Configuring the device to use the default Simple profile.
Setting up the Paired and Secured (PA Ir) Bluetooth profile.
Using the Hid profile for virtual keyboard functionality.
Steps to ensure the Bluetooth module is active for connection.
Guide to connecting the instrument to a master device.
Technical details on frequency band and modulation type.
Information on maximum output power and operational range.
Details on battery life based on usage modes (Continuous, Saver, Blind/Push).
How to use the proximity connector for data transfer.
Explains the available data output options (RS232, Bluetooth).
Identifies the CR2032 battery and shows the replacement process.
Clarifies that the IP67 rating applies solely to the electronic components.
Outlines the conditions under which the warranty is valid or voided.
Details compliance requirements for Brazil.
Details compliance requirements for Mexico.
Information on FCC and Industry Canada compliance standards.
Outlines radiofrequency radiation exposure limits and safety.
Details compliance requirements for South Korea.
Details compliance requirements for Japan.
Details compliance requirements for Taiwan.
