Bowflex BXE116 - Changing Resistance Levels; Workout Results and Controls; Pausing, Stopping, and Results

44
Handlebar Cable
8.SlightlypulltheHandlebarArmoffthemachinetoexposetheCable
Connections.
9. Disconnect the Handlebar Cable from the Upper Handlebar that goes
into the Console Mast.
10. Remove the Handlebar Arm from the machine.
11. Repeat steps 5-10 on the other side of the machine.
12.Usinga#2Phillipsscrewdriver,removethescrewsthatsecurethe
Upper Shrouds and Tray.
Note: Be sure to observe how the Handlebar Cables route through the
Upper Shrouds to assist with re-assembly.
X4
F
X2