Page 10/14
BOXER MOWER | User manual September 2019
6.2 Regular maintenance: every 50 hours of operation
Check the oil level of the gearbox and, if required, top it up.
Check the V-belt drive units and, if required, replace them.
V-belt drive units
1. Disconnect the mower from the tractor.
2. Loosen the housing.
3. Loosen the gearbox.
4. Move the gearbox so that the belts tighten or loosen.
5. Pay attention to the position of the belts.
6. The belt pushing-in is approximately 3/4” (± 20 mm).
6.3 Regular maintenance: every 200 hours of operation or annually
Replace the V-belts.