EasyManua.ls Logo

BOXER FA - Working Method and Use of the Mower

BOXER FA
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 7/14
September 2019BOXER MOWER | User manual
4. WORKING METHOD AND USE OF THE MOWER
Prior to use, the safety instructions given in Chapter 2 must be observed!
Only work with coupling rods that move freely upward such that the mower runs horizontally and on its own
four swivel casters.
The traveling wheels can be adjusted to set the working height (mower height).
Take care that the shaft with universal joint is as level as possible when in the working position.
Check the safeguards of top link pin and lifting rod pins.
If the mowing height is set too low, the blades usually make too much contact with the ground and the machine
will be damaged.
If required, untangle the chain links.
Work only at a power take-off rotation of 540 rpm.
After every working day, the mower must be cleaned carefully so that no grass and/or sand residue remains
stuck anywhere on the system and hardens. Park the combination with the mower on flat surface.
Do not stand on the machine if the blades are still rotating!!!

Related product manuals