BOXER FA - Putting Into Operation and Operating Instructions

Page 6/14
BOXER MOWER | User manual September 2019
3. PUTTING INTO OPERATION / OPERATING INSTRUCTIONS
Before connecting the mower to the machine mechanically, the following must be checked:
• Whether the machine has sufficient capacity in all situations that may arise.
• Whether the connection points to be secured on the mower match the connection points on the machine.
• Check that the power take-off does not touch anything with the lifting device in the highest and lowest
position.
• Make sure the chain guard on the back is working properly in connection with the danger of ejection of hard
bits such as stones, etc. If required, untangle the chain links.
• Whether the machine’s blades are sufficiently sharp; sharp blades guarantee a good result.
• Check the universal joint for proper connection and sufficient overlap (15 cm).
• Make sure that the power take-off and its cover are in good condition. Try to maintain a power take-off rotation
of 540 rpm. The power take-off guard is not allowed to rotate!!! (Use the chain attachment!!!)
After the points above have been checked, the mower can be connected to the machine mechanically. When
connecting mechanically, the machine must be maneuvered slowly to the attachment system.
Use the manual for specific settings and consult it with regard to the working method and use.