NOTE:
Please make sure to set up both of microphone and speaker to "24 bit, 48000 Hz (Studio Quality)"
Important
• If you do not intend to use the conference microphone for a long period time,
please remove the USB cable.
• Do not touch the microphone while recording, as this will cause noise to be
recorded.
• Do not let the microphone close to high-voltage equipment or to devices that
emit strong electromagnetic elds, otherwise, it may cause the noise to be
recorded.
• Do not use or leave the microphone in hot, humid places.
Maintenance
• Do not operate the device with wet hands or feet.
• Clean the equipment only in the way described in the instructions for use.
To Next Page
Loading...
