The BOYA BY-V is an ultracompact and portable 2.4GHz wireless microphone system designed for a wide range of applications, including remote teaching, live streaming, vlog shooting, and mobile journalism. It offers automatic pairing and an optional noise reduction feature, capable of recording 48kHz/16bit lossless audio even after noise reduction is applied.
Key Features and Components:
Transmitter (BY-V1-TX / BY-V2-TX):
- Built-in Microphone: Captures audio directly.
- Status Indicator: A multi-color LED that displays the current operational status:
- Unpaired: Blinking blue and red alternately.
- Paired Successfully: Static blue.
- Mute: Blinking blue.
- Noise Reduction ON: Static green.
- Low Battery: Blinking red.
- Charging: Static red.
- Fully Charged: Red light off.
- Note: If charging while the unit is ON, the indicator prioritizes the current working status over the charging status. The transmitter will automatically shut off within 10 minutes if the battery is low and not charged.
- NR Button: Press to toggle the noise reduction function on or off. This function cannot be activated or deactivated in mute mode.
- Power Button:
- Press and hold for 2 seconds to power the device on or off.
- Press briefly to mute or unmute the microphone.
- Belt Clip: Features a 360-degree rotation for flexible attachment.
- USB-C Charging Port: Used for charging the transmitter.
- Foam Windscreen: Helps to reduce wind noise for clearer audio.
Receiver (BY-V1-RX / BY-V2-RX for Lightning Connector; BY-V10-RX / BY-V20-RX for USB-C Connector):
- Status Indicator:
- Unpaired: Blinking blue.
- Paired Successfully: Static blue.
- MFi Certified Lightning Connector (BY-V1-RX / BY-V2-RX): Connects to iOS Lightning devices.
- USB-C Connector (BY-V10-RX / BY-V20-RX): Connects to Android smartphones, tablets, computers, and other USB-C devices.
- USB-C Charging Port: When the receiver is plugged into an external device, this port allows for charging and powering of the external device.
- Note for Lightning Receivers: Supports up to 3A charging current for iPhones and iPads.
- Note for USB-C Receivers: Most USB-C devices can be powered and charged through this port while in use.
Usage Instructions:
For BY-V1 / BY-V10 Kit (Single Transmitter):
- Press and hold the transmitter's power button for 2 seconds to turn it on.
- Plug the BY-V1-RX into an iOS Lightning device or the BY-V10-RX into a USB-C device.
- The transmitter and receiver will automatically pair within 10 seconds.
- The system is now ready for recording.
For BY-V2 / BY-V20 Kit (Dual Transmitters):
- Press and hold the power button on both BY-V2-TX transmitters for 2 seconds to turn them on.
- Plug the BY-V2-RX into an iOS Lightning device or the BY-V20-RX into a USB-C device.
- The transmitters and receiver will automatically pair within 10 seconds.
- The system is now ready for recording.
Important Note on Wireless Frequency:
Due to the 2.4GHz wireless frequency, the signal can be easily attenuated. It is recommended to avoid obstacles such as walls and buildings, and to keep the device away from other 2.4GHz signal sources like high-power Wi-Fi antennas or radios to ensure optimal performance.
Technical Specifications:
- Transmission Type: 2.4GHz
- Polar Pattern: Omnidirectional
- Frequency Response: 20Hz-16kHz
- Signal-to-noise Ratio: 80dB
- Sensitivity: -42dB
- Operating Range: 50m (without obstacles)
- RF Output Power: 6dBm
- Charging Port: USB-C
- Transmitter Battery Capacity: 95mAh
- Transmitter Charging Time: Approx. 2 hours
- Transmitter Battery Life: Approx. 9 hours
- Receiver Power Requirement: Supplied by External Devices
Weight:
- BY-V1-TX / BY-V2-TX: 9.5g
- BY-V1-RX / BY-V2-RX: 6g
- BY-V10-RX / BY-V20-RX: 6g
Dimensions:
- BY-V1-TX / BY-V2-TX: 52.22 × 25.23 × 19.75mm
- BY-V1-RX / BY-V2-RX: 43.92 × 23.5 × 9.3mm
- BY-V10-RX / BY-V20-RX: 43.92 × 24.7 × 9.3mm
Maintenance Features:
- Cleaning: Clean the device with only a soft, dry cloth.
- Storage: When using and storing, keep the device away from dust and moisture.
- Optimal Pickup: For the best pick-up pattern, avoid holding your hand against the microphone capsule cover.
- Battery: Do not remove the battery without professional assistance.
- General Cautions:
- Non-professional teardown is strictly prohibited.
- Keep the device away from heat sources such as radiators or spotlights.
Need help?
General
To Next Page
