Boyd Flex Base 6000 - Memory Setting

http://www.boydspecialtysleep.com
STEP 1:
Ensure the base is connected to the power supply
correctly and the remote control works properly. Ensure
the base is in the Flat position. Make sure the massage,
LED light and other functions are turned off.
STEP 2:
Adjust the HEAD and FOOT to your desired position.
Press the "TIMER/ALL OFF" button until all buttons on
the remote are flashing.
STEP 3:
While the buttons are flashing, press one of these three
buttons "MEMORY A"/"ANTI SNORE"/"ZERO GRAVITY"
until the flashing stops. The selected MEMORY
FUNCTION is now set.
Memory Setting
○
○
○
○