http://www.boydspecialtysleep.com
If one or more functions on the bed base have stopped operating, please check the
bed as follow:
◎Check under the bed base to verify that the wired connections are secure and that there are no
cords or bedding obstructing the movement of the base.
◎Check to see if the bed base is connected to the power supply correctly. Make sure the power
supply is connected to the outlet.
◎Ensure the batteries in the remote are new and operable.
◎If the power supply is working correctly, unplug the base for 1 hour to reset the electronic
components.
◎After the electronic components have been reset, follow the REMOTE SETTINGS steps on page
11 to reset the base.
If the issue is not resolved by following the instructions above, locate serial number on warranty card
or back of remote and contact customer service at 314-997-5222.
To Next Page
Loading...