Boyd Flex Base 6000 - Step 5: Remote; Step 6: Install Mattress Retainer

Installation
STEP 5: Remote
After the base is connected to the power supply, install three
AAA batteries into the remote battery compartment. See
pages 9 and 10 to learn how to operate the remote.
*Locate the mattress retainer as shown below [1)];
Insert the mattress retainer into the hooks at the foot of the
bed as shown [2)]. Slide the mattress retainer into place.
Ensure it is securely tightened. Place the mattress on the
bed base as shown [3)].
STEP 6: Install mattress retainer
http://www.boydspecialtysleep.com
1)
2)
3)