What to do if my Boyo AVD675D cannot power on after ignition switch?
D
Donald CollinsJul 31, 2025
If your Boyo Car Receiver doesn't power on after switching the ignition, there are a couple of things you can try. First, check the fuse and replace it with one of the same type if it's blown. Also, some factors might cause a wrong operation. In that case, press the RES button on the panel with a pen and then power it on.
D
Dr. James Sullivan MDAug 7, 2025
Why can't I watch images while driving with my Boyo Car Receiver?
D
Don AllenAug 7, 2025
Watching images while driving is not allowed. To watch images, park the car in a safe place, put the car stall in “ P ” position, pull up the hand brake, and ensure the parking brake wire is grounded.
S
Samuel SmithAug 15, 2025
What to do if my Boyo Car Receiver shows no image?
F
Fernando LunaAug 15, 2025
If your Boyo Car Receiver displays no image, it might be due to factors causing the MPU to operate incorrectly. Try pressing the [RES] button on the panel using a pen and then power the unit on.
S
Sara GomezAug 23, 2025
What to do if my Boyo Car Receiver cannot play disc?
J
Jenny DuarteAug 23, 2025
If your Boyo Car Receiver isn't playing discs, consider these possibilities: The disc might be scratched, so try a new one. Ensure the disc is inserted correctly with the labeled side up. The lens could be dirty; clean it using a lens cleaning disc.