4
2. SAFETY INSTRUCTION
• This manual contains important safety instructions which must be
strictly followed during installation & maintenance.
• The UPS contains voltages which are potentially hazardous. Please
contact our offices or qualified personnel for any services required.
•
The UPS is compatible to external strorage energy source( battery).
So proper verification of the batteries with terminal is required
before connecting to the UPS.
• Ground wire must be connected at the input at the time of installation.
• UPS should be connected with single phase input 230V, 3 wire
phase, neutral and earth and respective points marks L N E.
• Batteries must be replaced or maintained by qualified personnel.
• Replacement of batteries must be subject to quantity and types of
original specifications.
• To avoid explosion, keep fire or heating resources away from battery or
battery pack.
• Do not disassemble or damage the batteries. The electrolytic of
battery is poisonous and harmful especially to eyes and skin.
• The batteries contain high voltage and current with great risk.
• Do not short circuit the battery terminals.
3 A. Front Panel Diagram
To Next Page
Loading...