9
WARNING
TO AVOID PERSONAL INJURY DUE TO SHOCK, THE THIRD WIRE EARTH GROUND MUST BE
CONTINUOUS TO THE POWER OUTLET. BEFORE CONNECTION TO THE POWER OUTLET,
EXAMINE ALL CABLES AND CONNECTIONS BETWEEN THE UNIT AND THE FACILITY POWER
FOR A CONTINUOUS EARTH GROUND PATH.
THE POWER CABLE MUST MEET IEC SAFETY STANDARDS.
2.7 Signal Connections
Use RG58U 50 Ohm or equivalent coaxial cables for all input and output signals to and from the instrument.
1.4 TECHNICAL SUPPORT
If this product fails to operate upon arrival, contact your B&K PRECISION dealer or the factory to
arrange for service or exchange.
To arrange technical assistance or for service, contact the factory at:
B&K Precision Corp.
22820 Savi Ranch Parkway
Yorba Linda, CA 92887
714-921-9095
www.bkprecision.com
To Next Page
Loading...