B+K precision 830C - Measuring Subsystem

98
source type
:SOURce
<BUS | IMM>
Select a trigger
source
FETCh?
Returns a data any
time that the last
reading is valid.
SYSTem
:AOFF:TIME
<minute>:0~99
Set an auto power
off time
:BLIT
<Boolean>
Enable or disable
the backlit
:TIME
<second>:0~99
Set a backlit time
:BEEP
<Boolean>
Enable or disable
the buzzer.
:DEFAult
Set default value to
the non-volatile
memory
:ERRor?
Query error
message
:VERSion?
Query version of
the SCPI
STATus?
Query the status
Error Codes
In certain situations, errors may occur, and an error
code will be displayed on the meter. Below defines
the error description based on the error code.
Err0r 1: Unknown command
Err0r 2: Parameter Error
Err0r 3: Syntax Error
Test Equipment Depot - 800.517.8431 -
99 Washington Street Melrose, MA 02176
- FAX 781.665.0780 - TestEquipmentDepot.com