38
Print Only (Prnt)
Under remote operation, when the meter is set with
print only mode to “ON”, it will print out measured data
when the measurement cycle is complete and
automatically send the newest data to the PC
continuously. In this mode, any commands sent from
the PC will not be accepted. The remote indicator on
the meter display will flash when this mode is enabled.
Selectable parameters:
OFF, ON
Test Equipment Depot - 800.517.8431 -
99 Washington Street Melrose, MA 02176
- FAX 781.665.0780 - TestEquipmentDepot.com
To Next Page
Loading...