5
Battery
- The “discharged battery” limit is signalled by the lighting of a red Led and afterwards
by the motors switching off.
- To complete the work switch-off for a while the switch (FIG.1- 2).
- To make use of a further residual of charge, switch-off the side broom switch (FIG.1- 3).
CAUTION: In case of prolonged inactivity of the machine disconnect the battery
terminals.
Battery charger
To charge the battery:
- Make sure that the transformer connections have been set for the suitable voltage
from 90 up to 240 volts FIG.3 – Page 9.
- Use the cable already connected to the machine (TAV.A- 11), insert the plug in any
suitable AC. outlet.
- The time required for the complete recharge varies from 8 to 15 hours, depending on the
power grid condition.
- During the charge all functions are automatically switched-off.
CAUTION: during the battery charging avoid to have contacts with parts of the circuit
concerned by the network voltage.
Page 5
To Next Page
Loading...