PRE-DELIVERY CHECKLIST
6759
12-18-95
GENERAL INFORMATION
The following is a list of areas that should be inspected by the dealer
prior to delivery of the backhoe to the customer. The customer should
check the list and make sure that the dealer has completed the inspection.
Completion of this check list will help insure that the customer receives the
backhoe in complete working order, ready to install.
PRE-DELIVERY CHECKLIST - CHECK AND ADJUST AS NECESSARY
1 . _____ Check the hydraulic system for correct hydraulic fluid level.
2 . _____ Check and lubricate backhoe if necessary. See "Lubrication",
Section H.
3 . _____ Visually inspect the backhoe for bent, loose, cracked, damaged
or missing parts. Check for any other irregularities.
4 . _____ Remove paint from finished (chrome) surfaces of cylinders and
valve spools.
5 . _____ Backhoe control levers function and direction of operation are
in accordance with the control lever decals.
6 . _____ Run cylinders through their full cycle to purge any air from the
system.
7 . _____ Check all hydraulic connections for leaks and all hoses for
proper positioning to reduce chafing and binding.
8 . _____ Check backhoe attachment bolts for tightness. Retighten after
the first eight working hours, and after every forty working
hour interval thereafter. See "Bolt Torque", Section O.
9 . _____ Make sure decals are not damaged or missing and are in their
right location. See "Decals", Section Q.
10. _____ Complete and return the manufacturers "Warranty Validation
Form" and sign your dealership pre-delivery checklist.
11. _____ Operator to read the E.M.I. Loader/Backhoe safety manual
provided before operating backhoe.
R
R
To Next Page
Loading...