Bradford White Powered Direct Vent Series User Manual

238-42047-00F REV 10/04
POWERED DIRECT VENT SERIES GAS-FIRED
WATER HEATER
A Spanish language version of these instructions is available by contacting
the company listed on the rating plate.
La version espanola de estas instrucciones se puede obtener al escribile
a la fabrica cuyo nombre aparece en la placa de especificaciones.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
phone in your building.
• Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
Installation and service must be performed by a qualified
installer, service agency or the gas supplier.
For your family’s comfort, safety and convenience we
recommend Bradford White water heaters to be installed and
serviced by a plumbing professional.
PDX INSTALLATION AND OPERATING
INSTRUCTION MANUAL
FOR YOUR SAFETY
Do not store or use gasoline or other flammable,
combustible, or corrosive vapors and liquids in the
vicinity of this or any other appliance.
WARNING: If the information in these instructions is not
followed exactly, a fire or explosion may result causing
property damage, personal injury or death.
INTERNET VERSION FOR REFERENCE ONLY

Bradford White Powered Direct Vent Series Specifications

General

Category	Water Heater
Manufacturer	Bradford White
Vent Type	Direct Vent
Power Vent	Yes
Voltage	120 VAC
Water Connections	3/4" NPT
Series	Powered Direct Vent
Fuel Type	Natural Gas or Propane
First Hour Rating (FHR)	Varies by model and tank size
Tank Capacity (Gallons)	40, 50, 75 gallons
Maximum Gas Supply Pressure	10.5" WC Natural Gas / 13" WC Propane
Warranty	6-year limited warranty on tank and parts

Summary

General Information and Safety

Safety and Compliance

Covers certifications, codes, warranty, and critical safety warnings for proper operation.

Installation

Locating the Water Heater

Guidelines for selecting an appropriate installation location, considering safety and accessibility.

Minimum Clearances

Specifies required distances from the water heater to walls and other objects for safe operation and servicing.

Venting System Setup and Requirements

Details requirements for vent terminals, pipe lengths, elbows, condensation, and installation types.

Water Connections

Plumbing Installation and Safety

Instructions for connecting water lines, installing relief valves, and managing thermal expansion.

Gas Connections

Gas Line Installation and Leak Testing

Procedures for connecting the gas supply, ensuring proper pressure, and performing leak tests.

Electrical Connections

Wiring Diagrams and Power Requirements

Outlines electrical connection standards, grounding, and power source requirements with a wiring diagram.

General Operation

Filling and Draining Procedures

Step-by-step instructions for filling the water heater with water and draining it when necessary.

Lighting and Shutdown Procedures

Detailed safety warnings and steps for safely lighting and shutting down the water heater.

Thermostat Adjustment and Settings

Guide on adjusting the thermostat for optimal temperature settings and energy efficiency.

Burner Flame Inspection

Procedures for visually checking burner flames to ensure proper combustion and operation.

Maintenance

Periodic Maintenance Procedures

Recommended annual and monthly tasks for maintaining the water heater's performance and safety.

Parts, Warranty, and Record Keeping

Information on ordering parts, understanding the warranty, and recording essential appliance details.

Parts List and Diagrams

Component Identification

Illustrates and lists all components of the water heater for identification and replacement.

Blower Parts Drawing

Space Heating Installation Guidelines

Vent Pipe Preparation and Joining