Bradford White RG2DVMH40T6X User Manual

238-37281-00AB REV 9/21
GAS WATER HEATER
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any
phone in your building.
• Immediately call your gas supplier from a neighbor’s
phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
Installation and service must be performed by a qualified
installer, service agency or the gas supplier.
For your family’s comfort, safety and convenience we
recommend water heaters be installed and serviced by a
plumbing professional.
MANUFACTURED HOME (MOBILE HOME)
CLOSED COMBUSTION (DIRECT VENTING)
INSTALLATION AND OPERATING
INSTRUCTION MANUAL
FOR YOUR SAFETY
Do not store or use gasoline or other flammable,
combustible, or corrosive vapors and liquids in the
vicinity of this or any other appliance.
WARNING: If the information in these instructions is
not followed exactly, a fire or explosion may result
causing property damage, personal injury or death.
A Spanish language version of these instructions is available by
contacting the company listed on the rating plate.
La versión espãnola de estas instrucciones se puede obtener al
escribirle a la fábrica cuyo nombre aparece en la placa de
especificaciones.

Bradford White RG2DVMH40T6X Specifications

General

Brand	Bradford White
Model	RG2DVMH40T6X
Category	Water Heater
Language	English

Summary

General Information

Installation

Locating the Water Heater

Selects an appropriate location for the water heater, prioritizing safety and functionality.

Minimum Clearances

Specifies required clearances around the appliance for safe operation and maintenance access.

Drain Pan Installation

Details the installation of a drain pan to manage potential water leaks.

Combustion Air Supply

Instructions for ensuring adequate outdoor air for combustion and ventilation.

Venting

Procedures for properly installing the vent system to expel combustion gases.

Water Connections

Steps for connecting cold water inlet and hot water outlet lines.

Gas Connections

Guidelines for safely connecting the gas supply line to the water heater.

Gas Conversion Instructions

Procedures for converting the appliance between natural gas and LP gas.

General Operation

Lighting and Shutdown Instructions

Step-by-step guide for safely lighting and shutting down the water heater's pilot and burner.

Thermostat Adjustment

Instructions on how to adjust the thermostat for desired water temperature.

Burner Flame Check

Guidance on visually inspecting main burner and pilot flames for proper operation.

Maintenance

Annual Inspection and Cleaning

Covers annual tasks like checking thermostat, cleaning air openings, and inspecting burner assembly.

Periodic Component Checks

Details checks for T&P relief valve, draining sediment, and anode rod inspection.

Parts List