What to do if my Braemar BSHV50D1S has insufficient cooling?
If your Braemar Air Conditioner isn't cooling enough, it might be because the room was very hot when you first started the system; give the unit some time to cool the room. Also, check the air filter, as a dirty or blocked filter can restrict airflow. Clean the filter to resolve this.
How to fix Braemar BSHV50D1S Air Conditioner remote controller not working?
If the remote controller isn't operating your Braemar Air Conditioner, it might be out of range; the signal range is 8m. Poor signal reception could also be the issue; try removing any obstacles and electrical interference. If there's no display on the remote controller, check the batteries and replace them if needed.
Why my Braemar BSHV50D1S does not run?
If your Braemar Air Conditioner isn't running, it could be due to a few reasons. First, there might be a power failure, in which case you should wait for the power to come back on. Second, check for a blown fuse or an open circuit breaker and replace the fuse or reset the breaker. Lastly, the thermostat setting might be too low in heating mode or too high in cooling mode. Make sure to check the thermostat setting, and if you are in ‘I FEEL’ mode, consider if the remote is in a cold (COOL mode) or hot (HEAT mode) location.
Why SET temperature can’t be adjusted on Braemar Air Conditioner?
If you can't adjust the SET temperature on your Braemar Air Conditioner, it might be because the unit is operating in AUTO mode, where temperature settings are not allowed. Alternatively, the temperature you're trying to set might be outside the allowable range of 16-30°C.
Why does my Braemar BSHV50D1S make a clicking sound?
A clicking sound from your Braemar Air Conditioner during heating or cooling is normal. Plastic parts may expand or shrink due to a sudden temperature change, causing this sound.
Visual identification and description of the indoor unit's components and display panel.
Identification and description of the outdoor unit, including single/multi-split types.
Covers greenhouse gas regulations, qualified technician requirements, and appliance usage warnings.
Details on reading manuals, validating warranty, and maintaining outdoor unit airflow.
Guidelines for operating the remote control and instructions for changing batteries.
Diagrams and explanations of remote control buttons and their functions on the display.
Instructions for ON/OFF, FAN SPEED, MODE selection, and temperature adjustment.
Details on setting timers, adjusting louvre swing, X-FAN, and TURBO functions.
Covers TEMP display options, SLEEP, I FEEL, CHILD LOCK, and temperature unit settings.
Explanation of LIGHT, ENERGY SAVING, and 8°C HEATING FUNCTION modes.
Information on error codes, their meanings, and general fault conditions requiring service.
Essential safety steps before maintenance and instructions for air filter and coil cleaning.
A comprehensive schedule for user and technician maintenance over five years.
Guidance on normal operational events like white mist, noise, dust, smells, and compressor protection.
Addresses problems such as no operation, remote control issues, and insufficient cooling.
Contact details for refrigerated cooling issues and necessary information for support calls.
General| Brand | Braemar |
|---|---|
| Model | BSHV50D1S |
| Category | Air Conditioner |
| Language | English |
To Next Page
