What to do if my Braemar BCHV70D1S has insufficient cooling?
If your Braemar Air Conditioner isn't cooling enough, it might be because the room was very hot when you first started the system; give the unit some time to cool the room. Also, check the air filter, as a dirty or blocked filter can restrict airflow. Clean the filter to resolve this.
How to fix Braemar Air Conditioner remote controller not working?
If the remote controller isn't operating your Braemar Air Conditioner, it might be out of range; the signal range is 8m. Poor signal reception could also be the issue; try removing any obstacles and electrical interference. If there's no display on the remote controller, check the batteries and replace them if needed.
Why my Braemar BCHV70D1S does not run?
If your Braemar Air Conditioner isn't running, it could be due to a few reasons. First, there might be a power failure, in which case you should wait for the power to come back on. Second, check for a blown fuse or an open circuit breaker and replace the fuse or reset the breaker. Lastly, the thermostat setting might be too low in heating mode or too high in cooling mode. Make sure to check the thermostat setting, and if you are in ‘I FEEL’ mode, consider if the remote is in a cold (COOL mode) or hot (HEAT mode) location.
Why SET temperature can’t be adjusted on Braemar BCHV70D1S?
If you can't adjust the SET temperature on your Braemar Air Conditioner, it might be because the unit is operating in AUTO mode, where temperature settings are not allowed. Alternatively, the temperature you're trying to set might be outside the allowable range of 16-30°C.
Why does my Braemar Air Conditioner make a clicking sound?
A clicking sound from your Braemar Air Conditioner during heating or cooling is normal. Plastic parts may expand or shrink due to a sudden temperature change, causing this sound.
Australian Greenhouse Office regulations on refrigerants and qualified technician requirements.
Warnings for use by persons with reduced capabilities and child supervision.
Guidelines for using the remote controller and changing batteries.
Identification of buttons and features on the remote controller.
Explanation of icons and indicators on the remote controller display.
ON/OFF, FAN SPEED, MODE, TEMP adjustments, and CLOCK setting.
How to set timer ON and timer OFF functions for unit operation.
Adjusting louvre swing, X-FAN, and TURBO modes for optimal comfort.
Setting temperature, sleep mode, I FEEL, child lock, and temperature units.
Activating Energy Saving (SE) and 8°C Heating functions.
Understanding error codes and common fault conditions for the unit.
Essential safety steps before performing any cleaning or maintenance.
Instructions for cleaning and maintaining the air filter for optimal performance.
Guidance on cleaning indoor coils, outdoor units, and refrigerant checks.
Explanations for white mist, hissing, squeaking, and clicking sounds during operation.
Explanations for dust, peculiar smells, and fan operation during cooling.
General| Brand | Braemar |
|---|---|
| Model | BCHV70D1S |
| Category | Air Conditioner |
| Language | English |
To Next Page
