Need help?Do you have a question about the Brandywine Portable Timing Unit and is the answer not in the manual?
General| Brand | Brandywine |
|---|---|
| Model | Portable Timing Unit |
| Category | Data Loggers |
| Language | English |
Details on the various timing sources the PTU can synchronize to, including GPS, IRIG B, and HaveQuick.
Explanation of the PTU's internal oscillator and its role in maintaining accurate time.
Overview of the Ethernet interface for monitoring, updates, and NTP synchronization.
Description of the timing signal outputs provided by the PTU, such as 1PPS, Have Quick, IRIG B, and NTP.
Information on the PTU's internal 7Ah battery, its charge monitoring, and typical operating life.
Details about the 11-digit time display and front panel controls for illumination.
Description of the PTU's rugged, weatherproof enclosure suitable for outdoor use.
Procedure for powering the Portable Timing Unit (PTU) via AC or DC power and battery charging.
Steps for setting the PTU's network address, discovering IP, and configuring GPS reference inputs.
Instructions for connecting HaveQuick, IRIG B, and 1PPS signals as synchronization references.
Details on configuring output timing signals and understanding front panel LEDs and displays.
Information on battery charging, discharging, and low battery warnings.
Steps to connect to and access the PTU's web-based management interface using its IP address.
How to use the MENU button to access different functions and features of the PTU management page.
How to check current output time, UTC time, system state, alarms, and battery status via the web interface.
Procedure for selecting the input reference source and configuring GPS modes for the PTU.
Adjusting output timecode format, 1PPS settings, timezone, and daylight saving time.
Modifying IP address, SNMP settings, and the unit's physical location within the facility.
Changing front panel display brightness and updating the PTU's access username and password.
Solutions for units not powering up or failing to acquire satellite signals.
Guidance for resolving issues with time valid indicators and batteries not holding charge.
Steps to diagnose problems when the red fault light is on, including checking alarm lists.
To Next Page