"USE AND DISPOSAL" POLICY CONCERNED WITH ENVIRONMENT PRESERVATION
We try our best to preserve the environment, always concerned about our environmental impact at each
step of planning, development, production, distribution, use and disposal of products, and for our overall op
-
erations through “environmentally friendly” management system. We comply with international environmen
-
tal regulations, environmental regulations designated by country and local authorities and other require
-
ments with which we are in agreement, and we work towards the prevention of environmental pollution and
the conservation of resources. We provide environmental education and have an awareness campaign to
raise environmental awareness among all our employees and members of the supporting companies.
Here we introduce “Use and Disposal” policy concerned with environment preservation as follows.
1. Please read the operator’s manual though for global environment protection and avoid overload job. Overload on the
machineshortenstheproductlifeandincreasestheharmfulexhaustgaswhichcauseairpollutionduetotheincom-
plete combustion.
2.When replacing various uids (for engine, transmission,hydraulics,etc.)byyourself,don’tdispose the used oil to
anywhere not recommended. It can pollute the ground and water seriously. Please contact our local dealer to dis-
pose it legally.
3. Observe the operator’s manual and store or dispose the waste product properly. Rust, oil, etc leaked from waste
product improperly stored can pollute the ground and water. Accordingly for a waste product disposal, contact the
necessarily “approved waste collection and recycling facility” to discard the used machinery legally.
To Next Page
Loading...
